“Whether it’s riding on a forest service road on your side by side, overlanding in your Jeep, blazing new trail in your quad, or riding your Harley Davidson across the country, we have you covered!”
– Marshall Baker, founder of MyPilotPro
Shop Off Road Mounts
SecurePro Thumbscrew
Our SecurePro GoPro thumbscrew is CNC milled from a single aluminum billet. The end of the threads has a thru hole that accepts a cotter pin which eliminates the possibility of the thumbscrew coming undone. Choose from 3 different variations, a single SecurPro, a single SecurePro with a MyPilotPro Thumbscrew Wrench, or 2 SecurePro’s with a MyPilotPro Thumbscrew Wrench.The SecurePro Thumbscrew is the ultimate accessory for GoPro mounts!
- CNC milled aluminum billet
- Stainless steel 5mm X 0.8 bolt
- Stainless steel cotter pin
- Choose between 3 variations with or without a thumbscrew wrench
- Weighs just 0.65 oz
MyPilotPro GoPro Wrench
Quickly and easily tighten your GoPro thumbscrews. The wrench is accurately milled to fit GoPro thumbscrews so you can tighten them down to prevent any movement of the camera case during the extreme environments MyPilotPro mounts are meant to be used in. It easily attaches to your key ring as well so it will be with you when you need it!
- Weighs 0.7 oz
- Attaches to key ring
- Milled from aircraft aluminum
- 3.125″ long
Grizzly Off Road GoPro Mount
- Securely locks in place
- Glass filled nylon mount body
- Stainless steel hardware
- Neoprene spacers
- 4 sizes to fit 0.5″ thru 2.5″ diameter roll bar or railing
- 5.5 oz fully assembled
- Lifetime guarantee
15% cart discount when you buy 2 or more!
Grizzly Mount Bundle
- 2 Grizzly Mounts – your choice of size on both
- MyPilotPro GoPro Wrench
- Mounts securely locks in place
- Glass filled nylon mount body
- Stainless steel hardware
- Neoprene spacers
- 4 sizes to fit 0.5″ thru 2.5″ diameter railing
- Each mount weighs 5.5 oz fully assembled
- Lifetime guarantee
Bobcat Jeep GoPro Mount
- CNC milled aircraft aluminum mounting puck
- Stainless steel hardware
- Neoprene washers
- Genuine Ram Mount components
- 2.9 oz fully assembled
- Camera and camera case not included
- Required 1/2″ longer replacement body panel bolt not supplied
- Lifetime guarantee
15% cart discount when you buy 2 or more!
MyPilotPro Spider GoPro Windshield Mount
- Mount is made of milled aluminum with stainless steel hardware
- CNC milled aluminum GoPro adapter
- Universal to all aircraft, boats, and off road vehicles
- Width 3.75” between tips of suction cups
- Height 1.75”
- Weight 1.6 oz (including all hardware)
15% cart discount when you buy 2 or more!
MyPilotPro Spider Swivel GoPro Windshield Mount
- Mount is made of milled aluminum with stainless steel hardware
- Genuine Ram Mount® components
- Universal to all aircraft, boats, and off road vehicles
- Width 3.75” between tips of suction cups
- Height 4.5”
- Weight 4.9 oz including all hardware
15% cart discount when you buy 2 or more!
MyPilotPro Spider Mount Bundle
This bundle includes the Spider Swivel, Spider, and the MyPilotPro GoPro Wrench at an over 20% discount to retail pricing!
- MyPilotPro Spider
- MyPilotPro Spider Swivel
- MyPilotPro Wrench
Grizzly Hardware Pak
It’s not a matter of if, but when are you’re going lose critical hardware items for your Grizzly Mount! This hardware pak has all the miscellaneous hardware used in our Grizzly Mount plus a full neoprene spacer kit. You’ll never have to worry about a missing bolt, washer, cotter pin, or any other hardware again.
- 1/4-20 stainless steel bolt with thru hole and hair pin
- Stainless steel wing nut
- Stainless steel exterior tooth washer
- 1/4″ stainless steel flat washer
- Stainless steel cotter pin
- Neoprene spacer kit size of your choosing