4 reviews for MyPilotPro GoPro Wrench
100%
0%
0%
0%
0%
MyPilotPro GoPro Wrench
$2.95
Quickly and easily tighten your GoPro thumbscrews. The wrench is accurately milled to fit GoPro thumbscrews so you can tighten them down to prevent any movement of the camera case during the extreme environments MyPilotPro mounts are meant to be used in. It easily attaches to your key ring as well so it will be with you when you need it!
- Weighs 0.2 oz
- Attaches to key ring
- Made via additive manufacturing using composite polymers
- 3.125″ long
Related Products
MyPilotPro Hardware Pack
It’s not a matter of if, but when are you’re going lose critical hardware items for your MyPilotPro Aircraft Mount! This hardware pak has all the miscellaneous hardware used in our Aircraft Mounts. You’ll never have to worry about missing a wing nut, neoprene washer, hair pin, or any other hardware again.
- Stainless Steel Wing Nut
- Stainless Steel Exterior Tooth Lock Washer
- Stainless Steel Cotter Pin
- 2 Neoprene Washers
- Nylon Cam Lever Washer
Great Lakes Biplane GoPro Strut Mount
- Mount is additive manufactured using high strength and rigid glass filled nylon
- Stainless steel hardware throughout ensures secure attachment to your strut
- Neoprene pads ensure tight fit and eliminates marring to your strut
- Flight tested at +/- 4G load during acrobatic flight
- Swivel ball allows you to aim your camera in any direction or angle
- Lightweight at 6.2 oz including all hardware
15% cart discount when you buy 2 or more!
StrutPro GoPro Strut Mount
- Manufactured with high strength, lightweight, and extremely rigid glass filled nylon
- Stainless steel hardware throughout
- Fits Cessna, CubCrafter Carbon Cubs, Zenith, and Bearhawk wing struts
- Included 4ft aluminum tube securely mounts to the StrutPro body
- Weighs just over 2 lbs including all hardware
- Check out the Swivel Arm version of this mount HERE
- Mounting instructions, including A&P guide, can be found HERE
SecurePro Thumbscrew
Our SecurePro GoPro thumbscrew is precisely made from composite polyers via additive manufacturing and is outfitted with a stainless steel NyLock nut. Choose from 3 different variations, a single SecurPro, a single SecurePro with a MyPilotPro Thumbscrew Wrench, or 2 SecurePro’s with a MyPilotPro Thumbscrew Wrench. The SecurePro Thumbscrew is the ultimate accessory for GoPro mounts!
- Made via additive manufacturing using composite polymers
- Stainless steel 5mm X 0.8 bolt
- Stainless steel NyLock nut included
- Choose between 3 variations with or without a thumbscrew wrench
- Weighs just 0.5 oz
Decathlon GoPro Strut Mount
- Mount is additive manufactured using high strength and rigid glass filled nylon
- Stainless steel hardware throughout ensures secure attachment to your strut
- Neoprene pads ensure tight fit and eliminates marring to your strut
- Flight tested at +/- 3G load during acrobatic flight
- Swivel ball allows you to aim your camera in any direction or angle
- Lightweight at 6.2 oz including all hardware
15% cart discount when you buy 2 or more!
Birdseye Cockpit GoPro Mount
- Get that perfect Birdseye footage in the cockpit!
- Mount is made from additive manufacturing using composite polymers
- Comes with 3M™ VHB double sided foam pad to attach anywhere in the cockpit like the ceiling or dashboard
- Thumbscrew with stainless steel hardware included
- Weighs just 0.7 oz including the thumbscrew
- NOT INTENDED FOR EXTERIOR AIRCRAFT USE
GoPro Cockpit Mount – MyPilotPro Spider
- Mount is made via additive manufacturing using high strength and rigid glass filled nylon
- Stainless steel thumbscrew is included
- Universal to all aircraft, boats, and off road vehicles
- Width 3.75” between tips of suction cups
- Height 1.75”
- Very lightweight at 0.8 oz including all hardware
- Not designed for exterior aircraft use
15% cart discount when you buy 2 or more!
StrutPro Swivel Cessna GoPro Mount
- Additive manufactured with high strength and extremely rigid glass filled nylon
- Fits Cessna 150, 172, 180, 182, 185, & 206 wing struts
- Stainless steel hardware throughout
- Included swivel arms and ball allows footage from any angle and direction
- Weighs just under 1 lb including all hardware
- Check out our 4 ft boom version of this mount HERE
Anonymous (verified owner) –
useful, lightweight, easy to use
Anonymous (verified owner) –
A great tool
valerie C. (verified owner) –
Needed to lock firmly
Gordon S. (verified owner) –